MuseumWiki - Neue Seiten [de]

977 Saccharimeter 40 - 50 Brix, Assistent

2026-10-05T12:56:16Z

Rb: Die Seite wurde neu angelegt: „300px == Spezifikation == {| class="wikitable" |Gruppe |46.000 |- |Gattung |Armaturen und Geräte |- |Art |Saccharimeter…“

[[File:977_Armaturen und Geraete.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|46.000
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Saccharimeter
|-
|Typ
|40 - 50 Brix, Th 0 - 30 °C, Korrektur
|-
|Fabriknummer
|
|-
|Baujahr
|?
|-
|Herstellungsdauer
|?
|-
|Hersteller
|Assistent
|-
|Land
|Deutschland
|}

== Beschreibung ==

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:977_Armaturen_und_Geraete1.jpg|300px|thumb|left|Erklärung]]
|}

== Bemerkungen ==
Zum Bestimmen der Dichte von Traubenmost. 
Lieferant: H. Kunzmann, Rathausdrogerie, Zürich.

977 Saccharimeter 0 - 5 %vol., unbek. Hersteller

2026-10-05T12:25:58Z

Rb: /* Spezifikation */

Informationen zu Tschupp

2026-10-05T12:17:12Z

Rb: Die Seite wurde neu angelegt: „Gegründet 1907. Liegenschaften gekauft durch die Gemeinde Ballwil im Februar 2020.“

Gegründet 1907.
Liegenschaften gekauft durch die Gemeinde Ballwil im Februar 2020.

J. Tschupp & Co., Ballwil

2026-10-05T12:12:32Z

Rb:

'''[[Informationen zu Tschupp]]''' 
'''Maschinen in der ELVA-Sammlung - ''Machines dans la collection ELVA'' - machines in the ELVA collection:''' 

[[File:970 Armaturen und Geraete.jpg|70px]] [[970 Fasstalg, Tschupp|Fasstalg, Tschupp (Inv.nr. 970)]]

964 Aräometer Baumé, unbek. Hersteller

2026-10-05T11:38:52Z

Rb: /* Beschreibung */

[[File:964_Armaturen und Geraete.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|46.000
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Aräometer nach Baumé
|-
|Typ
|0 - 30 Bé
|-
|Fabriknummer
|
|-
|Baujahr
|?
|-
|Herstellungsdauer
|?
|-
|Hersteller
|?
|-
|Land
|?
|}

== Beschreibung ==
Baumé-Grade (°Bé) sind eine historische Einheit zur Angabe der Dichte einer Flüssigkeit. 
Sie werden vor allem bei Flüssigkeiten verwendet, bei denen die Dichte Rückschlüsse auf die Konzentration erlaubt. 
Bei Flüssigkeiten schwerer als Wasser: mehr °Bé = höhere Dichte. 
Verwendet wurden/werden °Bé z. B. für Salzlösungen, Säuren, Laugen und Sirupe. 

Bei Traubenmost werden Baumé-Grade (°Bé) verwendet, um den Zuckergehalt bzw. das Mostgewicht zu beurteilen. 
Sie geben damit einen Hinweis darauf, wie viel Alkohol bei der Gärung entstehen kann. 
Als grobe Orientierung: 
°Bé ungefährer Zuckergehalt möglicher Alkohol 
8 °Bé ~150 g/L ~8–9 % vol. 
10 °Bé ~180 g/L ~10–11 % vol. 
12 °Bé ~215 g/L ~12–13 % vol. 
14 °Bé ~250 g/L ~14–15 % vol. 
Wichtig: Die genaue Umrechnung hängt von Rebsorte, Temperatur und der verwendeten Skala ab. 
°Bé ist also nicht direkt gleich „Prozent Zucker“. 
Quelle: KI

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:964_Armaturen_und_Geraete1.jpg|250px|thumb|left|Lieferantenangabe]]
|}

== Bemerkungen ==
Lieferant: Rathausdrogerie Hans Kunzmann, Zürich

963 Thermometer -10 bis +120 °C, unbek. Hersteller

2026-10-05T11:36:26Z

Rb: Die Seite wurde neu angelegt: „300px == Spezifikation == {| class="wikitable" |Gruppe |46.000 |- |Gattung |Armaturen und Geräte |- |Art |Thermometer |…“

[[File:963_Armaturen und Geraete.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|46.000
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Thermometer
|-
|Typ
|-10 bis +120 °C.
|-
|Fabriknummer
|
|-
|Baujahr
|?
|-
|Herstellungsdauer
|?
|-
|Hersteller
|?
|-
|Land
|?
|}

== Beschreibung ==

== Photos und Prospekte ==

== Bemerkungen ==

Informationen zu Bendele

2026-10-03T11:11:45Z

Rb:

'''1908_ca. Empfehlungsschreiben Etikettiermaschine'''
{| class="galleryTable noFloat"
| [[File:1908 ca_Bendele.jpg|250px|thumb|left|Seite 1]]
| [[File:1908 ca_Bendele1.jpg|250px|thumb|left|Seite 2]]
|}

'''1908_ca. Prospekt Hebel'''
{| class="galleryTable noFloat"
| [[File:1908 ca_Hebel.jpg|250px|thumb|left|Seite 1]]
|}

Bendele, Stuttgart

2026-10-03T11:04:48Z

Rb: Die Seite wurde neu angelegt: „'''Informationen zu Bendele''' '''Maschinen in der ELVA-Sammlung - ''Machines dans la collection ELVA'' - machines in the ELVA collection:''' “

'''[[Informationen zu Bendele]]''' 
'''Maschinen in der ELVA-Sammlung - ''Machines dans la collection ELVA'' - machines in the ELVA collection:'''

1136 Fassfüllhahn, Frankreich

2026-10-01T15:04:38Z

Rb:

[[File:1136 Armaturen und Geraete.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|45.000
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Fassfüllhahn Messing
|-
|Typ
|Mâcon-40
|-
|Fabriknummer
|?
|-
|Baujahr
|?
|-
|Herstellungsdauer
|...1902 ca.....1930.....
|-
|Hersteller
|?
|-
|Land
|Frankreich
|}

== Beschreibung ==
Gewinde 1 x Mâcon 40, DA 55 x 3 mm

== Photos und Prospekte ==

== Bemerkungen ==

1135 Deckel zu Fassverschluss, Frankreich

2026-10-01T14:57:40Z

Rb: /* Photos und Prospekte */

[[File:1135 Armaturen und Geraete.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|45.000
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Deckel Alu zuFassverschluss Messing
|-
|Typ
|Mâcon-40
|-
|Fabriknummer
|?
|-
|Baujahr
|?
|-
|Herstellungsdauer
|...1902 ca.....1930.....
|-
|Hersteller
|?
|-
|Land
|Frankreich
|}

== Beschreibung ==
Gewinde 2 x Mâcon 40, DA 55 x 3 mm

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:1930_Deloule_173.jpg|300px|thumb|left|1930 Katalog Deloule, Seite 173]]
| [[File:1900_Depagne59.jpg|300px|thumb|left|1902 ca. Katalog Depagne, Seite 59]]
|}

== Bemerkungen ==

962 Fassverschluss, Frankreich

2026-10-01T14:31:25Z

Rb: /* Photos und Prospekte */

[[File:962 Armaturen und Geraete.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|45.000
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Fassverschluss Messing
|-
|Typ
|Fig. 593, Katalog Deloule
|-
|Fabriknummer
|?
|-
|Baujahr
|?
|-
|Herstellungsdauer
|...1902 ca.....1930.....
|-
|Hersteller
|?
|-
|Land
|Frankreich
|}

== Beschreibung ==
Gewinde 2 x Mâcon 40, DA 55 x 3 mm

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-

| [[File:962_Armaturen und Geraete1.jpg|310px|thumb|left|2 Gewinde Mâcon-40 (DA 50 x 2.5)]]
| [[File:833_Armaturen und Geraete1.jpg|250px|thumb|left|Küken für 3-Kant-Schlüssel. 2 Gewinde Mâcon-40 (DA 50 x 2.5)]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1930_Deloule_173.jpg|300px|thumb|left|1930 Katalog Deloule, Seite 173]]
| [[File:1900_Depagne59.jpg|300px|thumb|left|1902 ca. Katalog Depagne, Seite 59]]
|}

== Bemerkungen ==

935 Fassschraube, Friederich

2026-10-01T13:21:27Z

Rb:

[[File:935_Armaturen_und_Geraete.jpg|200px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|46.000
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Fassschraube
|-
|Typ
|24 x 280 mm, Schenk
|-
|Fabriknummer
|
|-
|Baujahr
|?
|-
|Herstellungsdauer
|?
|-
|Hersteller
|Friederich, Morges
|-
|Land
|Schweiz
|}

== Beschreibung ==

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:Friederich Armaturen1954 Seite1.jpg|200px|thumb|left|Friederich Armaturen 1954 Seite 1]]
| [[File:Friederich Armaturen1954 Seite2.jpg|200px|thumb|left|Friederich Armaturen 1954 Seite 2]]
| [[File:Friederich Armaturen1954 Seite3.jpg|200px|thumb|left|Friederich Armaturen 1954 Seite 3]]
| [[File:Friederich Armaturen1954 Seite4.jpg|200px|thumb|left|Friederich Armaturen 1954 Seite 4]]
|}
{| class="galleryTable noFloat"
|-
| [[File:Friederich Armaturen1954 Seite5.jpg|200px|thumb|left|Friederich Armaturen 1954 Seite 5]]
| [[File:Friederich Armaturen1954 Seite6.jpg|200px|thumb|left|Friederich Armaturen 1954 Seite 6]]
|}

== Bemerkungen ==

1134 Spundloch-Hobel, unbek. Hersteller

2026-10-01T12:46:49Z

Rb: Die Seite wurde neu angelegt: „400px == Spezifikation == {| class="wikitable" |Gruppe |46.600 |- |Gattung |Armaturen und Geräte |- |Art |Spundloch-Ho…“

[[File:1134_Armaturen_und_Geraete.jpg|400px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|46.600
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Spundloch-Hobel für Holzfässer
|-
|Typ
|
|-
|Fabriknummer
|?
|-
|Baujahr
|?
|-
|Herstellungsdauer
|?
|-
|Hersteller
|?
|-
|Land
|Deutschland (')
|}

== Beschreibung ==
(Beschreibung)

== Photos und Prospekte ==

== Bemerkungen ==

978 Korkenzieher Columbus

2026-10-01T12:06:58Z

Rb: /* Spezifikation */

[[File:978_Verschliesser.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|42.100
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Korkenzieher
|-
|Typ
|Columbus
|-
|Fabriknummer
|D.R.P. 70879
|-
|Baujahr
|nach 1893
|-
|Herstellungsdauer
|1893.............
|-
|Hersteller
|J.A. Henkels, Solingen
|-
|Land
|Deutschland
|}

== Beschreibung ==

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:978_Verschliesser1.jpg|180px|thumb|left|Marke]]
| [[File:978_Verschliesser2.jpg|180px|thumb|left|Hersteller]]
|}

== Bemerkungen ==
Der Korkenzieher wurde von Eduard Becker aus Solingen erfunden. 
Becker meldete die Erfindung im August 1892 als Gebrauchsmuster an 
und erhielt am 7. März 1893 das kaiserliche Patent (D.R.P. Nr. 70879) beim Deutschen Reichspatentamt in Berlin. 
Die Namensgebung „Columbus“ passte zur damaligen Zeit, als anlässlich des 400. Jahrestags 
der Entdeckung Amerikas ein regelrechter Kolumbus-Hype herrschte.

980 Korkenzieher Columbus

2026-10-01T12:03:07Z

Rb:

[[File:978_Verschliesser.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|42.100
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Korkenzieher
|-
|Typ
|Columbus
|-
|Fabriknummer
|D.R.P. 70873
|-
|Baujahr
|?
|-
|Herstellungsdauer
|?
|-
|Hersteller
|?
|-
|Land
|Deutschland
|}

== Beschreibung ==

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:978_Verschliesser1.jpg|180px|thumb|left|Merstellermarke]]
|}

== Bemerkungen ==

980 Handverschliesser für Alka, Waller, Zürich

2026-10-01T11:48:46Z

Rb: /* Photos und Prospekte */

[[File:980_Verschliesser.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|5.300
|-
|Gattung
|Verschliesser
|-
|Art
|Handverschliesser für Alka-Verschlüsse
|-
|Typ
|HZ4
|-
|Fabriknummer
|14
|-
|Baujahr
|ca. 1960
|-
|Herstellungsdauer
|?
|-
|Hersteller
|Willy Waller, Zürich
|-
|Land
|Schweiz
|}

== Beschreibung ==
Alka-Verschlüsse sind Alu-Deckel mit Abriss, welche auf Kronenkork-Mündungen passen.

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:980_Verschliesser1.jpg|300px|thumb|left|Hersteller]]
| [[File:598_Verschliesser6.jpg|300px|thumb|left|Verschliesskopf]]
|}

== Bemerkungen ==

1073 Flaschen-Reinigungsgerät, Amez-Droz

2026-09-28T11:22:22Z

Rb: Die Seite wurde neu angelegt: „300px == Spezifikation == {| class="wikitable" |Gruppe |3.600 |- |Gattung |Flaschenreinigung |- |Art |Flaschen-Reinigungsge…“

[[File:1073 Flaschenreinigung.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|3.600
|-
|Gattung
|Flaschenreinigung
|-
|Art
|Flaschen-Reinigungsgerät
|-
|Typ
|?
|-
|Fabriknummer
|-
|-
|Baujahr
|?
|-
|Herstellungsdauer
|?
|-
|Hersteller
|Amez-Droz
|-
|Land
|Schweiz
|}

== Beschreibung ==
(Beschreibung)

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:1073 Flaschenreinigung1.jpg|210px|thumb|left|Händlerschild ]]
| [[File:1073 Flaschenreinigung3.jpg|400px|thumb|left|Broncebürste ]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1955_ca_Reinigung1.png|200px|thumb|left|Reinigung Seite 1]]
| [[File:1955_ca_Reinigung2.png|200px|thumb|left|Reinigung Seite 2]]
|}

1131 Fasslampe mit Spiegel, unbek. Hersteller

2026-09-23T09:29:46Z

Rb: Die Seite wurde neu angelegt: „400px == Spezifikation == {| class="wikitable" |Gruppe |46.600 |- |Gattung |Armaturen und Geräte |- |Art |Fasslampe mi…“

[[File:1131_Armaturen_und_Geraete.jpg|400px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|46.600
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Fasslampe mit Spiegel
|-
|Typ
|
|-
|Fabriknummer
|?
|-
|Baujahr
|ca. 1950 (?)
|-
|Herstellungsdauer
|?
|-
|Hersteller
|?
|-
|Land
|Schweiz (?)
|}

== Beschreibung ==
Der Spiegel kann per Knopfdruck am Griff bewegt werden.
Stecker für 36 V Schwachstrom für nasse Umgebung.

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:1131_Armaturen_und_Geraete1.jpg|200px|thumb|left|Griff]]
|}

== Bemerkungen ==

1120 Isobarometer, Enzinger

2026-09-22T13:36:11Z

Rb: /* Photos und Prospekte */

[[File:1117_Fueller.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|4.200
|-
|Gattung
|Füller
|-
|Art
|Isobarometer für Bierfässer
|-
|Typ
|
|-
|Fabriknummer
|
|-
|Baujahr
|
|-
|Herstellungsdauer
|
|-
|Hersteller
|Enzinger, Worms
|-
|Land
|Deutschland
|}

== Beschreibung ==
Bild: ehemalige Versuchsbrauerei Brauerei Haldengut, Winterthur

== Photos und Prospekte ==

{| class="galleryTable noFloat"
|-
| [[File:1120_Isobarometer_oben.jpg|300px|thumb|left|Luftzylinder]]
| [[File:1120_Isobarometer_unten.jpg|210px|thumb|left|Füllkopf]]
|}
'''1950_4 Auszug'''
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck465.jpg|150px|thumb|left|Seite 465]]
| [[File:1950_DeClerck466.jpg|150px|thumb|left|Seite 466]]
| [[File:1950_DeClerck467.jpg|145px|thumb|left|Seite 467]]
| [[File:1950_DeClerck468.jpg|150px|thumb|left|Seite 468]]
|}

== Bemerkungen ==
Isobarometer nannte man einstellige Gegendruckfüller für Bierfässer.

1119 Isobarometer, Enzinger

2026-09-22T13:33:49Z

Rb: Die Seite wurde neu angelegt: „300px == Spezifikation == {| class="wikitable" |Gruppe |4.200 |- |Gattung |Füller |- |Art |Isobarometer für Bierfässer |- |Typ | |…“

[[File:1117_Fueller.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|4.200
|-
|Gattung
|Füller
|-
|Art
|Isobarometer für Bierfässer
|-
|Typ
|
|-
|Fabriknummer
|
|-
|Baujahr
|
|-
|Herstellungsdauer
|
|-
|Hersteller
|Enzinger, Worms
|-
|Land
|Deutschland
|}

== Beschreibung ==
Bild: ehemalige Versuchsbrauerei Brauerei Haldengut, Winterthur

== Photos und Prospekte ==

{| class="galleryTable noFloat"
|-
| [[File:1119_Isobarometer_oben.jpg|300px|thumb|left|Luftzylinder]]
| [[File:1119_Isobarometer_unten.jpg|260px|thumb|left|Füllkopf]]
|}
'''1950_4 Auszug'''
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck465.jpg|150px|thumb|left|Seite 465]]
| [[File:1950_DeClerck466.jpg|150px|thumb|left|Seite 466]]
| [[File:1950_DeClerck467.jpg|145px|thumb|left|Seite 467]]
| [[File:1950_DeClerck468.jpg|150px|thumb|left|Seite 468]]
|}

== Bemerkungen ==
Isobarometer nannte man einstellige Gegendruckfüller für Bierfässer.

1118 Isobarometer, Enzinger

2026-09-22T13:30:07Z

Rb: /* Photos und Prospekte */

[[File:1117_Fueller.jpg|300px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|4.200
|-
|Gattung
|Füller
|-
|Art
|Isobarometer für Bierfässer
|-
|Typ
|
|-
|Fabriknummer
|
|-
|Baujahr
|
|-
|Herstellungsdauer
|
|-
|Hersteller
|Enzinger, Worms
|-
|Land
|Deutschland
|}

== Beschreibung ==
Bild: ehemalige Versuchsbrauerei Brauerei Haldengut, Winterthur

== Photos und Prospekte ==

{| class="galleryTable noFloat"
|-
| [[File:1118_Isobarometer_oben.jpg|300px|thumb|left|Luftzylinder]]
| [[File:1118_Isobarometer_unten.jpg|260px|thumb|left|Füllkopf]]
|}
'''1950_4 Auszug'''
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck465.jpg|150px|thumb|left|Seite 465]]
| [[File:1950_DeClerck466.jpg|150px|thumb|left|Seite 466]]
| [[File:1950_DeClerck467.jpg|145px|thumb|left|Seite 467]]
| [[File:1950_DeClerck468.jpg|150px|thumb|left|Seite 468]]
|}

== Bemerkungen ==
Isobarometer nannte man einstellige Gegendruckfüller für Bierfässer.

Informationen zu Nyffeler, Corti, Kirchberg

2026-09-21T19:33:14Z

Rb:

'''Chronik''' (KI) 
Gründung in Kirchberg als Aluminiumwalzwerk. Die heutige NYCO führt 1890 als Gründungsjahr an. 
Die Firma Nyffeler, Schüpbach & Cie. bestand bereits in den 1920er-Jahren als Staniol- und Kapselfabrik in Kirchberg. 
Eine zeitgenössische Beschreibung von 1927 nennt genau diese Firma. 
Hans Nyffeler, Georg Elsässer und Rudolf Schüpbach waren später gemeinsam Gesellschafter dieser Kollektivgesellschaft. 
Rudolf Schüpbach kündigte den Gesellschaftsvertrag auf Ende 1942. Dadurch geriet die Gesellschaft ab 31. Dezember 1942 in Liquidation. 
Das ist im Bundesgerichtsentscheid von 1944 ausdrücklich festgehalten. 
Bemerkenswert ist, dass Nyffeler und Elsässer auf der einen Seite, Schüpbach auf der anderen Seite gegenüberstanden: 
Im Liquidationsverfahren verlangten sie teilweise unterschiedliche Regelungen. 
1945 ist die Firma in Kirchberg noch als „Nyffeler-Elsässer und Co.“ belegt. 
1950 wird bereits ausdrücklich „Nyffeler, Elsässer & Corti“ in Kirchberg erwähnt; Dr. W. Corti wird dabei als Teilhaber bezeichnet. 

Die Vorgängerfirma war offenbar nicht einfach neu gegründet worden. Ein Bundesgerichtsentscheid dokumentiert bereits 
eine Kollektivgesellschaft „Nyffeler, Schüpbach & Co.“, die aus Hans Nyffeler, Georg Elsässer und Rudolf Schüpbach 
bestand und sich Ende 1942 in Liquidation befand. 

Willi Corti war von der Alusuisse nach Kirchberg gekommen und Mitinhaber von Nyffeler Corti geworden, einer Fabrik, 
die Aluminiumverpackungen herstellte und 1966 an die US-Firma Kaiser verkauft wurde. 

1970er–1980er – Produktion/Verarbeitung von Aluminium- und anderen Verpackungsmaterialien 
1990er – weiterhin Produktionsbetrieb in Kirchberg 
1994 Zusammenschluss mit Clondalkin Group 
1996–2003 Betrieb in Kirchberg als Clondalkin Flexible Packaging dokumentiert; die Bezeichnung Nyffeler Corti wird noch verwendet 
1998/99 Nyffeler, Corti AG wird amtlich noch als aktiver Betrieb geführt 
danach Übergang zur Bezeichnung Nyco Flexible Packaging 
Bis 2023: Nyco Flexible Packaging GmbH 
Ende 2022: Nachlassstundung 
1. September 2023: Die neu gegründete NYCO Kirchberg AG übernahm die Mitarbeitenden und wesentlichen Aktiven 
und führte den Betrieb am gleichen Standort weiter. 
Heute (2026): NYCO Kirchberg AG produziert weiterhin Verpackungen in Kirchberg, unter anderem Shrink Sleeves, 
Stanzdeckel, Folien und weitere flexible Verpackungslösungen. 

'''Annonce in 1947-1, Seite 542''' 
{| class="galleryTable noFloat"
|-
| [[File:1946_Benvegnin_Capt_Piguet_542.jpg|500px|thumb|left|Seite 542]]
|}

Nyffeler, Corti, Kirchberg

2026-09-21T19:03:07Z

Rb: Die Seite wurde neu angelegt: „'''Informationen zu Nyffeler, Corti, Kirchberg''' “

'''[[Informationen zu Nyffeler, Corti, Kirchberg]]'''

1133 Fass-Reinigungsgerät, Neubecker

2026-09-21T14:00:45Z

Rb: /* Photos und Prospekte */

[[File:1133_Armaturen_und_Geraete.jpg|400px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|46.600
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Fass-Reinigungsgerät
|-
|Typ
|
|-
|Fabriknummer
|?
|-
|Baujahr
|ca. 1920 (?)
|-
|Herstellungsdauer
|?
|-
|Hersteller
|C.A. Neubecker, Offenbach am Main
|-
|Land
|Deutschland
|}

== Beschreibung ==
(Beschreibung)

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:1133_Armaturen_und_Geraete3.jpg|200px|thumb|left|Hersteller]]
| [[File:1133_Armaturen_und_Geraete1.jpg|200px|thumb|left|Schmierbüchse Achse]]
| [[File:1133_Armaturen_und_Geraete2.jpg|200px|thumb|left|Pedal]]
|}

== Bemerkungen ==
Wasserdüse fest, Auflage um Achse Wasserdüse frei drehbar.
Pedal links und rechts der Wasserdüse montierbar (hier links).

Informationen zu Neubecker

2026-09-21T12:28:06Z

Rb:

Die Maschinenfabrik C.A. Neubecker (gegründet 1867 in Offenbach am Main) war ein hochspezialisierter, 
traditionsreicher Hersteller von Anlagen für Bierbrauereien. Das Unternehmen war weltweit bekannt 
für sein Fabrikationsprogramm im Bereich der Fassreinigung, Fasspicherei (Auskleiden von Holzfässern mit Pech) und Keg-Abfüllung. 
Nachdem die Firma sich anfangs mit dem Bau von Brauereimaschinen jeder Art befaßt hatte, spezialisierte sie sich immer mehr 
auf Faßbehandlungsmaschinen und hat in neuerer Zeit, infolge der bekannten starken Behinderungen der Ausfuhr, 
an welcher die Firma mit ca. 80% ihres Umsatzes beteiligt war, die Fabrikation von Werkzeugmaschinen und Vorrichtungen mitaufgenommen. 
Vom Gesamtumsatz entfielen 1936 etwa 40 % auf den Export. 
Quelle: https://mbi.kgi.uni-mannheim.de/wiki/Item:Q3277

'''1930_ca_Sammelprospekt'''
{| class="galleryTable noFloat"
|-
| [[File:6b0921_Neubecker_Sammelprospekt.jpg|300px|thumb|left|Sammelprospekt]]
|}

Neubecker, Offenbach

2026-09-21T12:11:58Z

Rb:

'''[[Informationen zu Neubecker]]''' 
'''Maschinen in der ELVA-Sammlung - ''Machines dans la collection ELVA'' - machines in the ELVA collection:''' 

[[File:1132 Armaturen_und_Geraete.jpg|70px]] [[1132 Fass-Reinigungsgerät, Neubecker|Fass-Reinigungsgerät, Neubecker (Inv.nr. 1132)]]

1132 Fass-Reinigungsgerät, Neubecker

2026-09-21T12:04:13Z

Rb: /* Bemerkungen */

[[File:1132_Armaturen_und_Geraete.jpg|400px]]
== Spezifikation ==
{| class="wikitable"
|Gruppe
|46.600
|-
|Gattung
|Armaturen und Geräte
|-
|Art
|Fass-Reinigungsgerät
|-
|Typ
|
|-
|Fabriknummer
|?
|-
|Baujahr
|ca. 1920 (?)
|-
|Herstellungsdauer
|?
|-
|Hersteller
|C.A. Neubecker, Offenbach am Main
|-
|Land
|Deutschland
|}

== Beschreibung ==
(Beschreibung)

== Photos und Prospekte ==
{| class="galleryTable noFloat"
|-
| [[File:1132_Armaturen_und_Geraete1.jpg|200px|thumb|left|Hersteller]]
| [[File:1132_Armaturen_und_Geraete2.jpg|200px|thumb|left|Schmierbüchse Achse]]
| [[File:1132_Armaturen_und_Geraete3.jpg|200px|thumb|left|Pedal]]
|}

== Bemerkungen ==
Wasserdüse fest, Auflage um Achse Wasserdüse frei drehbar.
Pedal links und rechts der Wasserdüse montierbar (hier rechts).

Informationen zu Koyo

2026-09-21T09:27:47Z

Rb:

'''The Origin of KOYO Labeling Machines'''
Currently, there is one technology that is employed as a standard for labeling machines both domestic and abroad. We believe KOYO has played a great role in establishing that technology. Then what the KOYO’s technology like or from what kind of idea such technology originated in? This section will track the history of labeling machines from those perspectives. 

The oldest labeling machine so far as I know is the semi-automatic labeling machine by Krones AG (Germany) made in 1952 (1st photo below). The machine employed a system to lay down containers for placing labels and its production rate was 60 units per minute.
In 1956, Krones AG then developed a full automatic labeling machine whose production rate was 66 units per minute (2nd photo below) and seemed to become widely used rapidly.
Another older labeling machine was that of Jagenberg AG (Germany). A label magazine containing labels was placed on the conveyor line, swing arms catch the label ends and take out, lower them to the conveyor height and paste them to containers by aligning the label position with the center line of the container. There were a lot of technical challenges including an episode; adjusting work to align with the container center was so difficult that it took many months to solve any troubles. In a system that rotates containers to wrap labels around them, the leading edge of the labels was often folded. 
In terms of tack labelers, SATO CORPORATION released a hand labeler in 1961 and Takara Pac Ltd. released an auto labeler in 1962. 

KOYO labeling machines 

In the midst of such circumstances both domestic and abroad, KOYO Automatic Machine Co., Ltd (founded on January 5, 1968) shipped its first hopper labeler (foliage labeler, Type “LS-80”) to a honey manufacture and sales company on May 9, 1968. It was a challenging project for the company to release a labeling machine that incorporated the world’s first system.

The machine was equipped with all basic features of labeling machines handed down to the present and it is not an overestimate that this machine determined the direction of development of labeling machines. The core technology of this type was to suction paper labels by vacuum, send and pasted them to containers. Until the advent of this model, the vacuum suction system had been believed to be inappropriate for paper labels because of frequent problems of two-label suctioning due to vacuum leaks. Due to this difficulty, the system described earlier had been employed to catch and take out labels from the hopper (magazine) and then paste them. 

Employment of a vacuum suction drum 

The important decision by KOYO Automatic Machine to employ a suction system for labels using a vacuum pump which was very expensive at that time determined the direction of the development of labeling machines thereafter (Photos and diagrams below). The system invented employed a very simple label suction control system that uses a contact plate and the groove on the rotor board (at first the component was made of gunmetal and fixed type without springs) immediately below the transfer drum. 

One of the hard challenges throughout the development process was the method to take out labels one by one from the label hopper (label magazine) where foliage labels (cut labels) are stored. 
Delicate operations are necessary in order to take labels held with claws at the take out port on the label hopper smoothly by releasing them off the claws. The mechanism that made this possible was the linkage of a swing hopper that draws a unique track with a cum & link mechanism, and rotation movements of a vacuum suction drum.
This cum & link mechanism draws a trajectory produced by mixing the right and left swinging movement of the crank to the suction drum and the fore and aft swinging movement of the cum. This movement makes the label hopper repeat movement cycles of moving closer to the suction drum until it comes into contact with the drum and then move away from the drum in synchronization with the rotation speed of the drum. More precisely, when the tip of the hopper moves at a slightly higher speed than the rotation of the suction drum, the claws will move off the tip of the labels. At the same time, the portion between the center and the trailing edge of the label will make a positive curvature thus it is separated from the following label (Patent: 1971.12). 

Configuration of a hopper labeler 

The whole sketch of a one-sheet labeling machine can be seen in several patent documents in 1971 (Diagram below). This machine has almost all of basic elements that are incorporated in the present labeling machines. 
The container transfer unit comprises a conveyor, screws, star wheels and a sensor for label takeout container. The label application unit comprises a pasting drum, an adhesive applicator, a label hopper and a pressure bonding plate.<brv
Although this Patent unit does not employ any round finish plates, which will become one of major labeler components, this is because the main purpose of the patent application was the development of a labeling machine that could handle containers made of soft materials. The label finishing unit comprises a finishing belt that completes pasting of a label while rotating containers and an upper belt used for capping containers. 

{| class="galleryTable noFloat"
|-
| [[File:6b0921_Chapter_2_The Origin_of_KOYO_Labeling_Machines.jpg|400px|thumb|left|LS-80]]
|}

The technique widely used then was to simulate human hand motion to apply a label to a container. Use of a vacuum suction drum to apply labels to a rotating container marked an innovative change. The most important point lied on the extremely simple label application system where the vacuum suction drum rotates and, at the same time, containers rotates and revolves (rotation and revolution) around the drum to wrap and apply labels. The element that enabled this system was the round finish plate (Photos below). 

{| class="galleryTable noFloat"
|-
| [[File:6b0921_Koyo2.jpg|400px|thumb|left|Vakuumzylinder]]
|}

The round finish plate is an arc-shaped pressure bonding plate concentric with the pasting drum and having the size appropriate for the container diameter, and which plates are located in the vicinity of the pasting drum. This round finish plate and the rotating pasting drum work together to rotate containers (rotation and revolution around the drum) (initial rotation) and, at the same speed, labels will be wrapped around the containers. 
In addition, a cold glue applicator, a timing screw, a finishing belt and other basic elements of a labeler which later developed to the present models are equipped in an almost perfect forms. Although any patent documents that describe adhesive applicators in detail are not found, the basic configuration of the present models is the same (Patent: 1971.11).
This suction drum type labeling application system employing the configuration above has become the basic model of labeling machines all over the world. The design has disseminated not only throughout Japan but also among a lot of companies around world which fact indicates the model is the global standard of labeling machines. 
And the vacuum suction pasting drum that transfers cut labels for the roll labeler that will be later developed is currently employed in all roll labelers in the world (Figures and photos below). 

{| class="galleryTable noFloat"
|-
| [[File:6b0921_Koyo3.jpg|400px|thumb|left|rotation and revolution]]
|}

Deployment of hopper labelers 

In the course of the deployment of hopper labelers in the following period, the company predicted market needs and improved the speed (improvement of the pasting efficiency), multi-point pasting (front label, back label, shoulder label) and pasting precision and developed new technologies. As described earlier, the hopper labeler has a mechanism to take out labels with the vacuum suction drum in combination with the unique swinging motions of the hopper. As a result, the label take-out capability is limited and the pasting efficiency was about 180 per minute at most. 
The company increased this processing efficiency by developing a double- hopper labeler [Type LK-300] (Pasting capability 356 units/min.) that doubled the label pasting capability by installing 2 pairs of label hoppers and suction drums and enabling to transfer to the pasting drums alternately (Photos and diagrams below). 

{| class="galleryTable noFloat"
|-
| [[File:6b0921_Koyo4.jpg|400px|thumb|Doppel-Etikettenmagazin]]
|}

In addition to the improved process speed with the double-hopper labeler, a label position correction unit was born for a higher pasting precision (Patent: 1978.10). This patent document describes the double-hopper labeler equipped with 2 pairs of label hoppers and suction drums (Figure below). 

{| class="galleryTable noFloat"
|-
| [[File:6b0921_Koyo5.jpg|400px|thumb|Vakuum-Zylinder]]
|}

The system has enabled a high-speed supply of labels with double hoppers by making a gap between the suction drum and the pasting drum so that labels will be transferred to the pasting drum that rotates at a peripheral speed faster than that of the suction drum. Reference to a label position correction unit appeared for the first time in this document. 
The role of the label position correction unit is, as its name suggests, to improve pasting precision by correcting the label position in the up, down, right and left directions while those labels taken out of the label hopper is rotated and transferred with the suction drum. What has enabled this were the simple mechanism of the correction guide, the correction claws on the suction drum, and vacuum suction opening/closing with the rotor board of the suction drum and their and well-designed linkage operation. 

Realization of the hopper labeler (Type LRW) for front/back application of S-character track transferred labels 

pasting drums. The front label suction assembly and the back label suction assembly whose pitches are aligned are equipped on the pasting drum, which suctions front and back labels, transfer them and paste on containers (Figure below). The company shipped its first LFB type labeler in June, 1974. 

{| class="galleryTable noFloat"
|-
| [[File:6b0921_Koyo6.jpg|400px|thumb|LFB Type]]
|}

In 1971, the company developed a National Certificate Stamp Applicator “LK-KO” (Figure below) and 5 units were shipped in that fiscal year alone. Various ideas were incorporated in this model not to waste any single certificate stamp and this model has acquired high confidence and, although the number is not limited, have been shipped every year constantly. 

{| class="galleryTable noFloat"
|-
| [[File:6b0921_Koyo7.jpg|400px|thumb|LK-KO Type]]
|}

In case of an overlapping label problem, the system is equipped with a two-fold checking mechanism comprising a two-label drum, a collecting comb, and the unit on the collection box to collect certificate stamps and detection on the two overlapping label sensor. Although the label applicator with adhesive to containers (cartons) (Patent: 1977.8, U.S. Patent 1978) was not originally designed to apply certificate stamps to containers (cartons), this system in the present labelers may be applied to certificate stamp applicators. This system applies adhesives to containers and then pastes labels to the bonding surface of the containers. The system eliminates needs for a comb-shaped label peeler, enables front application of labels and allows use of a strong adhesive (such as hot melt). 
As described above, the models of hopper labelers have been added with a swing hopper cum link mechanism, a vacuum suction drum and other functions to increase the application precision, two-point application of front/back sides, and increase in the application speed for the 10 years since the foundation of the company. All models of all hopper labelers currently being produced have been developed and shipped during this period. The models include: “LS”, “LN-305”, “LK-300 (double-hopper high speed model)”, “LK-KO (certificate stamp applicator)”, “LRW (S-character transfer front/back side applicator)”, “LFB (double-hopper front/back application drum type)”, “LNO” and a hopper labeler for cassettes (applied model of LRW). 
Then the hopper labeler that uses production lines as they are developed into a model to which two or more hopper labeler application stations were connected by adding a container transfer assembly comprising a turret rotary and infeed/outfeed star wheels. 
In 1984, the first LH type turret hopper labeler was shipped to a major food company. This product is also utilized in combinations with stations for other application models (roll labeler: LR type, tack labeler: LE type and LK type). 

Shifting of a hopper labeler to a fixed hopper and its application 

As described earlier, hopper labelers carry out unique swing operation to take out labels out of the hopper with the rotating vacuum suction drum. As a result, labels cannot be refilled to the hopper during operation. 
The weight of a hopper for storing larger labels will be large and the label take-out speed will low. In 2000s, development of a new mechanism was started to supply labels without moving the label hopper, which had been a technical challenge (Figure below). 

{| class="galleryTable noFloat"
|-
| [[File:6b0921_Koyo8.jpg|400px|thumb|Fixe Etikettenmagazine]]
|}

The company developed a take-out mechanism that employs a vacuum suctioning arm to take out labels out of a fixed hopper to accept horizontally long foliage labels and its prototype was completed (Patent Application: 2004.3). 
In this mechanism, the suction arm swings to take out foliage labels out of the fixed hopper and allow them to be suctioned on the drum with the take-in auxiliary roller. Immediately after this process, the suction drum will feed the labels, which then will be caught and transferred between the infeed belts. This process enables to take out and supply horizontally long foliage labels reliably. The first mechanism was improved in several phases to be installed in labelers for shipping. This mechanism was further improved so that a cum rotated in response to the continuous rotation of the main unit swings a suction arm in a combined motion in fore and aft and right and left directions, which arm suctions and takes out foliage labels stored in the fixed hopper (Photos and diagrams below). 

{| class="galleryTable noFloat"
|-
| [[File:6b0921_Koyo9.jpg|400px|thumb|Fixe Etikettenmagazine]]
|}

The suction arm takes out labels by releasing them off the hopper claw in a similar motion to that of the conventional swing hopper. This system was incorporated in large rotary turret labelers that also had the functions of a roll labeler and the products were shipped in five to six units consecutively. 
The system was also incorporated in fixed hopper labelers for supplying horizontally long labels or necker labelers for bottle neck labels 

Quelle: https://www.koyo-jidouki.co.jp/en/en-history/chapter-2-the-origin-of-koyo-labeling-machines/ 
Originaltext nicht redigiert.

Koyo, Yokohama

2026-09-21T09:19:25Z

Rb: Die Seite wurde neu angelegt: „'''Informationen zu Koyo''' “

'''[[Informationen zu Koyo]]'''

1950-4 J. DeClerck: Lehrbuch der Brauerei

2026-09-12T14:21:41Z

Rb:

DeClerck Jean, Prof., Versuchs- und Lehranstalt für Brauerei in Berlin, Band 1, 576 Seiten. 
1948, Deutsche Uebersetzung 1950. 

{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck_000.jpg|150px|thumb|left|Umschlag]]
| [[File:1950_DeClerck_000_01.jpg|150px|thumb|left|ehem. Eigentümer]]
| [[File:1950_DeClerck_000_02.jpg|150px|thumb|left|Titel]]
| [[File:1950_DeClerck_000_03.jpg|150px|thumb|left|Titel]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck_000_04.jpg|145px|thumb|left|Bewilligung]]
| [[File:1950_DeClerck_000_05.jpg|150px|thumb|left|Vorwort]]
| [[File:1950_DeClerck_000_07.jpg|150px|thumb|left|Inhalt]]
| [[File:1950_DeClerck_000_08.jpg|150px|thumb|left|Inhalt]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck_000_09.jpg|150px|thumb|left|Inhalt]]
| [[File:1950_DeClerck_000_10.jpg|150px|thumb|left|Inhalt]]
| [[File:1950_DeClerck_000_11.jpg|160px|thumb|left|Inhalt]]
| [[File:1950_DeClerck_000_12.jpg|150px|thumb|left|Inhalt]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck_000_13.jpg|150px|thumb|left|Inhalt]]
| [[File:1950_DeClerck_000_14.jpg|145px|thumb|left|Inhalt]]
| [[File:1950_DeClerck_000_15.jpg|150px|thumb|left|Inhalt]]
| [[File:1950_DeClerck_000_16.jpg|150px|thumb|left|Inhalt]]
|}
'''Filtrieren und Abfüllen'''
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck442.jpg|150px|thumb|left|Seite 442]]
| [[File:1950_DeClerck443.jpg|145px|thumb|left|Seite 443]]
| [[File:1950_DeClerck444.jpg|150px|thumb|left|Seite 444]]
| [[File:1950_DeClerck445.jpg|150px|thumb|left|Seite 445]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck446.jpg|150px|thumb|left|Seite 446]]
| [[File:1950_DeClerck447.jpg|145px|thumb|left|Seite 447]]
| [[File:1950_DeClerck448.jpg|150px|thumb|left|Seite 448]]
| [[File:1950_DeClerck449.jpg|150px|thumb|left|Seite 449]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck450.jpg|150px|thumb|left|Seite 450]]
| [[File:1950_DeClerck451.jpg|145px|thumb|left|Seite 451]]
| [[File:1950_DeClerck452.jpg|150px|thumb|left|Seite 452]]
| [[File:1950_DeClerck453.jpg|150px|thumb|left|Seite 453]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck454.jpg|150px|thumb|left|Seite 454]]
| [[File:1950_DeClerck455.jpg|145px|thumb|left|Seite 455]]
| [[File:1950_DeClerck456.jpg|150px|thumb|left|Seite 456]]
| [[File:1950_DeClerck457.jpg|150px|thumb|left|Seite 457]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck458.jpg|150px|thumb|left|Seite 458]]
| [[File:1950_DeClerck459.jpg|145px|thumb|left|Seite 459]]
| [[File:1950_DeClerck460.jpg|150px|thumb|left|Seite 460]]
| [[File:1950_DeClerck461.jpg|150px|thumb|left|Seite 461]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck462.jpg|150px|thumb|left|Seite 462]]
| [[File:1950_DeClerck463.jpg|145px|thumb|left|Seite 463]]
| [[File:1950_DeClerck464.jpg|150px|thumb|left|Seite 464]]
| [[File:1950_DeClerck465.jpg|150px|thumb|left|Seite 465]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck466.jpg|150px|thumb|left|Seite 466]]
| [[File:1950_DeClerck467.jpg|145px|thumb|left|Seite 467]]
| [[File:1950_DeClerck468.jpg|150px|thumb|left|Seite 468]]
| [[File:1950_DeClerck469.jpg|150px|thumb|left|Seite 469]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck470.jpg|150px|thumb|left|Seite 470]]
| [[File:1950_DeClerck471.jpg|145px|thumb|left|Seite 471]]
| [[File:1950_DeClerck472.jpg|150px|thumb|left|Seite 472]]
| [[File:1950_DeClerck473.jpg|150px|thumb|left|Seite 473]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck474.jpg|150px|thumb|left|Seite 474]]
| [[File:1950_DeClerck475.jpg|145px|thumb|left|Seite 475]]
| [[File:1950_DeClerck476.jpg|150px|thumb|left|Seite 476]]
| [[File:1950_DeClerck477.jpg|150px|thumb|left|Seite 477]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck478.jpg|150px|thumb|left|Seite 478]]
| [[File:1950_DeClerck479.jpg|145px|thumb|left|Seite 479]]
| [[File:1950_DeClerck480.jpg|150px|thumb|left|Seite 480]]
| [[File:1950_DeClerck481.jpg|150px|thumb|left|Seite 481]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck482.jpg|150px|thumb|left|Seite 482]]
| [[File:1950_DeClerck483.jpg|145px|thumb|left|Seite 483]]
| [[File:1950_DeClerck484.jpg|150px|thumb|left|Seite 484]]
| [[File:1950_DeClerck485.jpg|150px|thumb|left|Seite 485]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck486.jpg|150px|thumb|left|Seite 486]]
| [[File:1950_DeClerck487.jpg|145px|thumb|left|Seite 487]]
| [[File:1950_DeClerck488.jpg|150px|thumb|left|Seite 488]]
| [[File:1950_DeClerck489.jpg|150px|thumb|left|Seite 489]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck490.jpg|150px|thumb|left|Seite 490]]
| [[File:1950_DeClerck491.jpg|145px|thumb|left|Seite 491]]
| [[File:1950_DeClerck492.jpg|150px|thumb|left|Seite 492]]
| [[File:1950_DeClerck493.jpg|150px|thumb|left|Seite 493]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck494.jpg|150px|thumb|left|Seite 494]]
| [[File:1950_DeClerck495.jpg|145px|thumb|left|Seite 495]]
| [[File:1950_DeClerck496.jpg|150px|thumb|left|Seite 496]]
| [[File:1950_DeClerck497.jpg|150px|thumb|left|Seite 497]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck498.jpg|150px|thumb|left|Seite 498]]
| [[File:1950_DeClerck499.jpg|145px|thumb|left|Seite 499]]
| [[File:1950_DeClerck500.jpg|150px|thumb|left|Seite 500]]
| [[File:1950_DeClerck501.jpg|150px|thumb|left|Seite 501]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck498.jpg|150px|thumb|left|Seite 498]]
| [[File:1950_DeClerck499.jpg|145px|thumb|left|Seite 499]]
| [[File:1950_DeClerck500.jpg|150px|thumb|left|Seite 500]]
| [[File:1950_DeClerck501.jpg|150px|thumb|left|Seite 501]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck502.jpg|150px|thumb|left|Seite 502]]
| [[File:1950_DeClerck503.jpg|145px|thumb|left|Seite 503]]
|}
'''Der Ausschank des Bieres'''
{| class="galleryTable noFloat"
|-
| [[File:1950_DeClerck543.jpg|150px|thumb|left|Seite 543]]
| [[File:1950_DeClerck544.jpg|145px|thumb|left|Seite 544]]
| [[File:1950_DeClerck545.jpg|150px|thumb|left|Seite 554]]
| [[File:1950_DeClerck999.jpg|150px|thumb|leftDeckel hinten]]
|}

1980-5 Troost G.: Technologie des Weines

2026-08-28T20:17:36Z

Rb:

Handbuch der Kellerwirtschaft, Band I; 5.Auflage 
Verlag Eugen Ulmer, Stuttgart, 1980. 1057 Seiten.

{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_000.jpg|220px|thumb|left|Buchdeckel 1]]
| [[File:1980_Troost_000_02.jpg|210px|thumb|left|Weitere Handbücher]]
| [[File:1980_Troost_000_03.jpg|215px|thumb|left|Titel]]
| [[File:1980_Troost_000_04.jpg|215px|thumb|left|Titel]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_000_05.jpg|210px|thumb|left|Vorwort]]
| [[File:1980_Troost_000_06.jpg|210px|thumb|left|Inhalt]]
| [[File:1980_Troost_007.jpg|215px|thumb|left|Inhalt]]
| [[File:1980_Troost_008.jpg|210px|thumb|left|Inhalt]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_009.jpg|220px|thumb|left|Inhalt]]
| [[File:1980_Troost_010.jpg|215px|thumb|left|Inhalt]]
| [[File:1980_Troost_011.jpg|215px|thumb|left|Inhalt]]
| [[File:1980_Troost_012.jpg|215px|thumb|left|Inhalt]]
|}
'''Technik der Flaschenreinigung'''
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_843.jpg|220px|thumb|left|Seite 843]]
| [[File:1980_Troost_844.jpg|220px|thumb|left|Seite 844]]
| [[File:1980_Troost_845.jpg|215px|thumb|left|Seite 845]]
| [[File:1980_Troost_846.jpg|215px|thumb|left|Seite 846]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_847.jpg|220px|thumb|left|Seite 847]]
| [[File:1980_Troost_848.jpg|220px|thumb|left|Seite 848]]
| [[File:1980_Troost_849.jpg|215px|thumb|left|Seite 849]]
| [[File:1980_Troost_850.jpg|215px|thumb|left|Seite 850]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_851.jpg|220px|thumb|left|Seite 851]]
| [[File:1980_Troost_852.jpg|220px|thumb|left|Seite 852]]
| [[File:1980_Troost_853.jpg|215px|thumb|left|Seite 853]]
| [[File:1980_Troost_854.jpg|215px|thumb|left|Seite 854]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_855.jpg|220px|thumb|left|Seite 855]]
| [[File:1980_Troost_856.jpg|220px|thumb|left|Seite 856]]
|}
'''Industrielle Flaschenverschlüsse'''
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_932.jpg|215px|thumb|left|Seite 932]]
| [[File:1980_Troost_933.jpg|220px|thumb|left|Seite 933]]
| [[File:1980_Troost_934.jpg|215px|thumb|left|Seite 934]]
| [[File:1980_Troost_935.jpg|215px|thumb|left|Seite 935]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_936.jpg|215px|thumb|left|Seite 936]]
| [[File:1980_Troost_937.jpg|210px|thumb|left|Seite 937]]
| [[File:1980_Troost_938.jpg|215px|thumb|left|Seite 938]]
| [[File:1980_Troost_939.jpg|215px|thumb|left|Seite 939]]
|}
'''Abfüll-, Ausstattungs- und Verpackungslinien'''
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_957.jpg|215px|thumb|left|Seite 957]]
| [[File:1980_Troost_958.jpg|220px|thumb|left|Seite 958]]
| [[File:1980_Troost_959.jpg|215px|thumb|left|Seite 959]]
| [[File:1980_Troost_960.jpg|215px|thumb|left|Seite 960]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_961.jpg|215px|thumb|left|Seite 961]]
| [[File:1980_Troost_962.jpg|220px|thumb|left|Seite 962]]
| [[File:1980_Troost_963.jpg|215px|thumb|left|Seite 963]]
| [[File:1980_Troost_964.jpg|215px|thumb|left|Seite 964]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1980_Troost_965.jpg|215px|thumb|left|Seite 965]]
| [[File:1980_Troost_999.jpg|225px|thumb|left|Seite 999]]
|}

Informationen zu Korthals, Zürich

2026-08-21T08:43:25Z

Rb:

Zeitweise Schweizer Vertretung von Holstein & Kappert 

'''1955'''
{| class="galleryTable noFloat"
|-
| [[File:1955_Korthals_HK_Novissima_Brief.jpg|240px|thumb|left|Brief]]
| [[File:1955_Korthals_HK_Novissima_Bild.jpg|240px|thumb|left|Novissima]]
|}
'''1956 Orba'''
{| class="galleryTable noFloat"
|-
| [[File:1956_Korthals_Brief.jpg|240px|thumb|left|Brief]]
| [[File:1956_Korthals_Schema_Orba.jpg|240px|thumb|left|Schema Orba]]
|}

Korthals, Zürich

2026-08-21T08:34:17Z

Rb: Die Seite wurde neu angelegt: „'''Informationen zu Korthals, Zürich'''“

'''[[Informationen zu Korthals, Zürich]]'''

Informationen zu Kettingfabriek Kapa

2026-08-20T16:38:47Z

Rb:

Keine weiteren Informationen verfügbar. 

'''1955_ca_Kapa'''
{| class="galleryTable noFloat"
|-
| [[File:1955_ca_Kappa1.jpg|250px|thumb|left|Prospekt Seite 1]]
| [[File:1955_ca_Kappa2.jpg|215px|thumb|left|Prospekt Seite 2]]
|}

Kettingfabriek Kapa, Amsterdam

2026-08-20T16:37:02Z

Rb: Die Seite wurde neu angelegt: „'''Informationen zu Kettingfabriek Kapa''' “

'''[[Informationen zu Kettingfabriek Kapa]]'''

Informationen zu Vidus-Huet, Paris

2026-08-16T20:13:40Z

Rb:

'''1957 Empfehlungsschreiben''' 
{| class="galleryTable noFloat"
|-
| [[File:1957_Vidus_Huet_Brief.jpg|200px|thumb|left|Seite 1]]
| [[File:1957_Vidus_Huet_Brief2.jpg|200px|thumb|left|Seite 2]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1957_Vidus_Huet_Brief3.jpg|200px|thumb|left|Seite 3]]
| [[File:1957_Vidus_Huet_Brief4.jpg|200px|thumb|left|Seite 4]]
|}

Vidus-Huet, Paris

2026-08-16T20:11:08Z

Rb: Die Seite wurde neu angelegt: „'''Informationen zu Vidus-Huet, Paris'''“

'''[[Informationen zu Vidus-Huet, Paris]]'''

Informationen zu Contraves

2026-08-16T20:04:18Z

Rb:

'''1950_ca_Annonce''' 
{| class="galleryTable noFloat"
|-
| [[File:1950_ca_Contraves.jpg|300px|thumb|left|Annonce]]
|}

Contraves, Zürich

2026-08-16T20:02:58Z

Rb: Die Seite wurde neu angelegt: „'''Informationen zu Contraves''' '''Maschinen in der ELVA-Sammlung - ''Machines dans la collection ELVA'' - machines in the ELVA collection:''' “

'''[[Informationen zu Contraves]]''' 
'''Maschinen in der ELVA-Sammlung - ''Machines dans la collection ELVA'' - machines in the ELVA collection:'''

Informationen zu Arter

2026-08-16T19:52:51Z

Rb:

Belegte Geschäftsdauer: 1938 - 1950. 

{| class="galleryTable noFloat"
|-
| [[File:1950_ca_Arter.jpg|200px|thumb|left|Seite 1]]
| [[File:1950_ca_Arter2.jpg|200px|thumb|left|Seite 2]]
| [[File:1950_ca_Arter3.jpg|200px|thumb|left|Seite 3]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_ca_Arter3a.jpg|200px|thumb|left|Seite 3a]]
| [[File:1950_ca_Arter4.jpg|200px|thumb|left|Seite 4]]
| [[File:1950_ca_Arter5.jpg|200px|thumb|left|Seite 5]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1950_ca_Arter6.jpg|200px|thumb|left|Seite 6]]
| [[File:1950_ca_Arter7.jpg|205px|thumb|left|Seite 7]]
| [[File:1950_ca_Arter8.jpg|200px|thumb|left|Seite 8]]
|}

Arter, Männedorf

2026-08-16T19:46:18Z

Rb:

'''[[Informationen zu Arter]]''' 
'''Maschinen in der ELVA-Sammlung - ''Machines dans la collection ELVA'' - machines in the ELVA collection:

Informationen zu Brattström, Allan

2026-08-15T19:44:49Z

Rb:

Geschäftstätigkeit gesichert zwischen 1942 und 1971. 

'''1950'''
{| class="galleryTable noFloat"
| [[File:1950_Brattstroem_Brief.jpg|250px|thumb|left|Empfehlungsschreiben]]
| [[File:1950_Brattstroem_Brief2.jpg|240px|thumb|left|Empfehlungsschreiben]]
| [[File:1950_Brattstroem_Brief3.jpg|250px|thumb|left|Empfehlungsschreiben]]
|}
{| class="galleryTable noFloat"
| [[File:1950_Brattstroem_Prospekt1.jpg|250px|thumb|left|Prospekt1]]
| [[File:1950_Brattstroem_Prospekt2.jpg|250px|thumb|left|Prospekt2]]
| [[File:1950_Brattstroem_Prospekt3.jpg|250px|thumb|left|Prospekt3]]
| [[File:1950_Brattstroem_Prospekt4.jpg|250px|thumb|left|Prospekt4]]
|}

Brattström, Allan, Stockholm

2026-08-15T19:41:18Z

Rb: Die Seite wurde neu angelegt: „'''Informationen zu Brattström, Allan''' “

'''[[Informationen zu Brattström, Allan]]'''

Informationen zu Pfleghart, Zürich

2026-08-15T19:12:38Z

Rb:

'''1948 Brief Columbit'''
{| class="galleryTable noFloat"
|-
| [[File:1948_Pfleghard_Brief.jpg|200px|thumb|left|Empfehlungsschreiben Columbit]]
|}

Pfleghart, Zürich

2026-08-15T19:10:54Z

Rb: Die Seite wurde neu angelegt: „'''Informationen zu Pfleghart, Zürich''' '''Maschinen in der ELVA-Sammlung - ''Machines dans la collection ELVA'' - machines in the ELVA collection:''…“

'''[[Informationen zu Pfleghart, Zürich]]''' 
'''Maschinen in der ELVA-Sammlung - ''Machines dans la collection ELVA'' - machines in the ELVA collection:'''

Informationen zu Baumgartner, Basel

2026-08-15T10:49:56Z

Rb: Die Seite wurde neu angelegt: „{| class="galleryTable noFloat" |- | Einfuhr für Seitz, Bad Kreuznach |}“

{| class="galleryTable noFloat"
|-
| [[File:1934_Einfuhr.jpg|300px|thumb|left|Einfuhr für Seitz, Bad Kreuznach]]
|}

Baumgartner, Basel

2026-08-15T10:48:56Z

Rb:

'''[[Informationen zu Baumgartner, Basel]]''' 

Offenbar zeitweise Seitz-Vertreter für die Schweiz.

1932-2 H. Weide: Die technischen Grundlagen für das Seitz'sche Bier-Sterilisation-Verfahren auf kaltem Wege

2026-08-14T19:27:23Z

Rb:

Sonderdruck aus No. 218/219 der "Allgemeinen Brauer- undH opfen-Zeitung" vom 16./17. September Jahrgang 1932. 

{| class="galleryTable noFloat"
|-
| [[File:1932_Seitz_Grundlagen1.jpg|110px|thumb|left|Seite 1]]
| [[File:1932_Seitz_Grundlagen3.jpg|210px|thumb|left|Seite 2 und 3]]
| [[File:1932_Seitz_Grundlagen5.jpg|210px|thumb|left|Seite 4 und 5]]
| [[File:1932_Seitz_Grundlagen7.jpg|210px|thumb|left|Seite 6 und 7]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1932_Seitz_Grundlagen9.jpg|210px|thumb|left|Seite 8 und 9]]
| [[File:1932_Seitz_Grundlagen11.jpg|210px|thumb|left|Seite 10 und 11]]
| [[File:1932_Seitz_Grundlagen12.jpg|100px|thumb|left|Seite 12]]
|}

1932-3 G. Britschke: Vier Artikel zur Bierfiltration

2026-08-14T19:13:06Z

Rb:

Sonderdruck aus der "Allgemeinen Braumeister-Zeitung", Berlin, Nummer 32, 34, 35, 37 und 39 - 1932 

{| class="galleryTable noFloat"
|-
| [[File:1932_Seitz_moderne_Filtration_01.jpg|210px|thumb|left|Seite 1]]
| [[File:1932_Seitz_moderne_Filtration_02.jpg|200px|thumb|left|Seite 2]]
| [[File:1932_Seitz_moderne_Filtration_03.jpg|210px|thumb|left|Seite 3]]
| [[File:1932_Seitz_moderne_Filtration_04.jpg|200px|thumb|left|Seite 4]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1932_Seitz_moderne_Filtration_05.jpg|210px|thumb|left|Seite 5]]
| [[File:1932_Seitz_moderne_Filtration_06.jpg|200px|thumb|left|Seite 6]]
| [[File:1932_Seitz_moderne_Filtration_07.jpg|200px|thumb|left|Seite 7]]
| [[File:1932_Seitz_moderne_Filtration_08.jpg|200px|thumb|left|Seite 8]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1932_Seitz_moderne_Filtration_09.jpg|210px|thumb|left|Seite 9]]
| [[File:1932_Seitz_moderne_Filtration_10.jpg|200px|thumb|left|Seite 10]]
| [[File:1932_Seitz_moderne_Filtration_11.jpg|200px|thumb|left|Seite 11]]
| [[File:1932_Seitz_moderne_Filtration_12.jpg|200px|thumb|left|Seite 12]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1932_Seitz_moderne_Filtration_13.jpg|205px|thumb|left|Seite 13]]
| [[File:1932_Seitz_moderne_Filtration_14.jpg|200px|thumb|left|Seite 14]]
| [[File:1932_Seitz_moderne_Filtration_15.jpg|200px|thumb|left|Seite 15]]
| [[File:1932_Seitz_moderne_Filtration_16.jpg|200px|thumb|left|Seite 16]]
|}

1932-1 H. Weide: Die technischen Grundlagen für das Seitz'sche Bier-Sterilisation-Verfahren auf kaltem Wege

2026-08-14T10:03:28Z

Rb:

Sonderdruck aus No. 218/219 der "Allgemeinen Brauer- und Hopfen-Zeitung" 
vom 16./17. September Jahrgang 1932, 12 Seiten. 

{| class="galleryTable noFloat"
|-
| [[File:1932_Seitz_Grundlagen1.jpg|160px|thumb|left|Titelseite]]
| [[File:1932_Seitz_Grundlagen3.jpg|300px|thumb|left|Seiten 2 und 3]]
| [[File:1932_Seitz_Grundlagen5.jpg|300px|thumb|left|Seiten 4 und 5]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1932_Seitz_Grundlagen7.jpg|300px|thumb|left|Seiten 6 und 7]]
| [[File:1932_Seitz_Grundlagen9.jpg|300px|thumb|left|Seiten 8 und 9]]
|}
{| class="galleryTable noFloat"
|-
| [[File:1932_Seitz_Grundlagen11.jpg|300px|thumb|left|Seite 10 und 11]]
| [[File:1932_Seitz_Grundlagen12.jpg|150px|thumb|left|Seite 12]]
|}

Informationen zu Tiedemann, Zürich

2026-08-09T19:43:30Z

Rb:

'''1923 Brief'''
{| class="galleryTable noFloat"
|-
| [[File:1923_Tiedemann_Brief.jpg|150px|thumb|left|Seite 1]]
|}